Guide

How to allocate buses to boards

The right bus on every board, and every bus able to get out when its board goes. A planner's guide to depot allocation.

Allocation is two jobs done together: deciding which bus works each board, and making sure that bus can actually leave the depot when its board pulls out. Most of the trouble at five in the morning comes from treating them as separate.

Start from what each board needs

List the day's boards with their pull-out time and what each needs:

  • The type of bus. Single or double deck, length, and anything a route demands, such as low height or a particular model.
  • A particular bus, where a board needs one by fleet number, for branding or a contract.
  • The charge or fuel it needs, for electric buses on long boards.
  • Whether it comes back and goes out again, as school runs and part-day boards do.

Take the VOR buses out first

Before allocating anything, mark the buses that are off the road. They must never be allocated, and they matter for another reason: a VOR bus parked in a lane blocks every bus behind it until it's moved.

Allocate the hardest boards first

Boards that need a particular bus or a scarce type leave you the fewest choices, so allocate them first. Then fill the boards any bus can work. Doing it the other way round is how a double decker ends up on a board that only needed a single, and the board that needed the double has none left.

Check each bus can get out

In lane parking, a bus can only leave once every bus in front of it has gone. For each allocation, check the buses ahead of it pull out earlier. If a bus is behind one not leaving until later, either allocate a different bus or plan the moves the night before. The best allocation on paper is no use if the bus is boxed in.

Park returning buses for the afternoon

School runs and part-day boards come back mid-morning. Where they park decides whether the afternoon goes smoothly. Park each returning bus by when it next goes out, so it doesn't end up in front of a bus leaving before it.

Electric buses and chargers

With electric buses, allocation and parking also decide charging. Know which spaces have chargers and how long each bus will be on charge, and only send a bus on a board it has the charge to finish. Plan which buses go on charge first by when they're next needed.

Put it where people can see it

Print the allocation for the output desk and put it on a screen in the drivers' room, so drivers find their bus without asking.

Where Lane Marshal fits

Lane Marshal does the allocation and the parking together. It matches buses to boards by deck, model and fleet number, keeps VOR buses out, checks each bus can get out in time, and plans where returning buses park. Every choice comes with a reason a planner would say out loud. See Lane Marshal for bus, coach and school transport.

Allocate tomorrow's boards

Add your fleet and the day's boards, and Lane Marshal matches a bus to each one and says why, in plain English.

Download for Windows See it at a bus depot Windows may say it protected your PC while we're new. Click More info, then Run anyway.